How To Change Oil In 2018 F150

The EcoBoost Ford F150 ii.7 oil change is a uncomplicated procedure that can be easily done past anyone. With a anarchistic plastic oil drain plug that you tin remove by paw and a cartridge fashion oil filter, the oil alter is different past no harder than whatsoever other. The cartridge way oil filter minimizes whatsoever mess from oil spilling out of the oil filter while the plastic oil drain plug is much easier to remove than typical style however the larger bore causes the oil to push out farther and with more force than other bleed plugs. This article is specific to 2015, 2016, 2017, 2018, 2019, 2020 and 2021 model year F150 trucks equipped with the 2.7L EcoBoost engine. For a similar commodity specific to F150 trucks equipped with the iii.3L engine, view this article.

Tools Needed:

27mm socket, extension (6"+) and ratchet for the oil filter housing
8mm socket and ratchet for the lower engine cover
O ring choice
Funnel
Oil drain pan with at to the lowest degree 6 quart capacity
Store rags or towels

Parts needed:

As an Amazon Associate I earn from qualifying purchases.

Engine oil filter: Motorcraft FL2062 or equivalent aftermarket part
Engine oil: 5W30 engine oil (half dozen.0 quart capacity)
Optional – Engine oil bleed plug (but needed if it is found to be damaged or if oil is leaking past the O ring)

2015+ Ford F150 2.seven Oil Change Procedure:

Park truck in a level spot and make certain the engine is up to operating temperature
Bank check engine oil level to verify no prior issues such every bit oil consumption
Remove oil make full cap
Remove rear lower engine encompass (below engine oil drain plug) if equipped using the 8mm socket and ratchet
Drain the engine oil into the bleed pan by squeezing the locking tabs on the plastic drain plug and twisting it counter clockwise
Inspect drain plug to brand certain it has no harm such as cracked plastic or worn O ring
Reinstall drain plug once it has fully drained and reattach the rear lower engine cover
Using the 27mm socket, ratchet and extension, remove the engine oil filter cap
Remove and supersede the engine oil filter cartridge and cap O ring
Lubricate engine oil filter cap O ring with fresh engine oil and reinstall to engine oil filter housing
Fill engine with v.7 quarts of fresh engine oil using the funnel
Reinstall engine oil fill cap
Showtime engine, let the oil force per unit area build, and turn the ignition back to the OFF position
Bank check oil level on the dipstick and top off if information technology is found to exist low